Bucket Teeth In New Design

Now we are offering new design in bucket teeth. Certainly we have compared the bucket teeth between external and internal. Working conditions of bucket tooth in mining excavator, failure analysis of bucket teeth all have been considered into. New design for bucket teeth had better reduce the digging resistance as far as possible. Beside we also add the designing of material volume in effective working parts of tooth tip.

There are some characteristics in new designing. For example, our new design has been changed symmetrical location of the center line. That makes the wear surface consistent with abrasion surface in mining process. So it will present a smooth continuous curve. This could reduce the resistance in digging.

On the other hand, our new design for bucket teeth has increased effective material volume and  \geometric size in tip. When the material volume has been increased upon 15%, the total bucket teeth weight will be not increased or increased little. With this new designing, the service life of bucket teeth will be improved 30%. Above all, we can know that increasing effective working volume of material and reduce digging resistance could improve the service life of bucket teeth.

Article From: http://www.nbtt.cc/Daewoo-Bucket-Teeth/18SA%2820mm%29-99.html

Assembling Bucket Lip And Tooth

Electric excavator is the main equipment in mining production. Assembling bucket tooth and lip in this equipment is very important. Because more firm assembling, more safe working. So we should know how to assemble the bucket tooth and lip firmly.

While you are installing new electric excavator, you should mapping the geometry size of assembly binding site between bucket tooth cavity and the bucket lip at first. And making as a model. Then repeating examination and correction with the physical. Finally drawing a pattern.

We can use bucket tooth model to test the new assembling position. If there is any wear, we can take some measures to solve the problem of wear. Sometimes we could do surfacing welding for wear parts and burnish until it coincide with model. Then installing a new bucket tooth.

With above operations, electric excavator can keep careful examination and diligent in repair for a long term. At the same time, the bucket tooth and bucket lip could cooperation with each other successfully. Certainly the safety and efficiency of electric excavator have been improved. On the contrary, if you have not installed the bucket tooth and bucket lip badly, that may be result in serious accidents.